MARTIN VDO Sceptron 10-032

Descriptions détaillées

• Extensive range of field-exchangeable optical accessories for a wide variety of looks
• Easy setup, mapping and configuration
• Bright and fully calibrated for optimal consistency
• 10 mm pixel pitch
• 250 cd per meter calibrated
• 750 lumen per meter calibrated
• High-quality 16-bit per color image processing technology
• Pixel-level brightness and color calibration for optimal image quality
• P3/DMX controllable (automatic protocol detection)
• Intuitive mapping and addressing via P3 System Controller
• Combined power/data input (single cable for power and data input)
• Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system
• Available in lengths of 1000 mm and 320 mm

• Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500 / Martin P3™ PowerPort 1000 IP, and/or DMX
• Protocol detection: Automatic
• Control modes: RGB, basic, segment and pixel-level
• Setting and addressing: P3 System Controller or RDM-compliant controller
• Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
• Color and intensity calibration: Pixel-level
• DMX channels: 3/10/13/22/103/307
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20
• Firmware update: Via Martin P3™ System Controller

• Device status: Multi-color visual indication
• Device test and reset: Magnetic pushbutton to call up local test patterns and reset device

• Options
  • Open Front
  • Flat Diffuser
  • Flat Smoked Diffuser
  • Round Diffuser
  • Round Smoked Diffuser
  • Square Diffuser
  • Square Smoked Diffuser
  • Tube Diffuser
  • Tube Smoked Diffuser
  • Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

• Color resolution: 16 bits per color (48 bits per pixel)
• Viewing angle: 120° x 120°
• Pixels per meter: 100
• Pitch (pixel center-to-center): 10.00 mm
• Luminous intensity, calibrated mode: 250 cd per meter*
• Total output, calibrated mode: 8 333 nits (modules spaced 30 mm center-to-center)*
• Total output, calibrated mode: 750 lumens per meter*

• Brightness control
• Gamma correction and control
• Color temperature control
• Color space control
• Calibration processing
• Synchronization

• Martin P3 (via Martin P3™ PowerPort) or DMX

• Base: Extruded aluminum profile
• Color: Matt black
• Protection rating: IP65
• RoHS compliant

• Orientation: Any
• Mounting: Slot for locking nuts on back of profile (M6) and optional sliding bracket for M12 bolt
• Mounting options: Flat surface at any angle, pedestal or other suitable support

• Power and data input: 6-pin custom (BBD) IP66-rated
• Power and data thru: 6-pin custom (BBD) IP66-rated
• Hot plugging compatible

• Nominal input voltage: 48 VDC +/- 4%
• Power supply options: Martin P3™ PowerPort 1500, P3™ PowerPort 1000 IP, Tripix™ Power or generic 48 VDC PSU
• Total power consumption (at max. intensity, full white): 33 W per meter

• Cooling: Convection
• Maximum ambient temperature (Ta max.): 55° C (131° F)
• Minimum ambient temperature (Ta min.): -20° C (-4° F)
• Total heat dissipation (calculated, +/- 10%): 115 BTU/hr per meter

• EU safety: EN 60950-1, EN 60950-22, EN 62471
• EU EMC: EN 55032, EN 55024
• US safety: UL 60950-1, UL 60950-22
• US EMC: FCC Part 15 Class A
• Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
• Canadian EMC: ICES-003 Class A
• Australia/NZ: C-Tick N4241