NEXO NXAMP4x4 Dante

Amplificateur 4x 3300w sous 4Ω, filtre intégré, équipé carte Dante

Descriptions détaillées

POWER SPECIFICATIONS FOR NXAMP Powered TDcontroller

  • Max. output power (8 Ω) : 1900 W (non bridged) / 6600 W (2 channels bridged)
  • Max. output power (4 Ω) : 3300 W (non bridged) / 8000 W (2 channels bridged)
  • Max. output power (2 Ω) : 4000 W (non bridged)
  • Power consumption : 20 W Standby, 150 W Idle, 3000 W 1/8 Power

SPECIFICATIONS FROM ANALOG IN TO POWER OUT

  • Analog Inputs channels : 4 channels analog inputs on XLR 3 with a second XLR 3 for linking
  • Frequency response : +/- 0.5 dB from 10 Hz to 20 KHz
  • Input Impedance : 20 KOhm.
  • Max Input Level : +28 dBu
  • Dynamic Range : All Channels = 105dB unweighted
  • THD + Noise : Typical 0.1% flat setup
  • Latency time : 2.2 ms on a flat setup (Compatible with NX241 and NX242)
  • Power Supply : Dedicated version for 100 ~ 120 Volts or 220 ~ 240 Volts

FRONT AND BACK PANEL FEATURES

  • Audio Inputs : 
    • 4 balanced analog inputs on XLR with link, using 24 bit converters.
    • 4 digital inputs via the optional network card slot at the back.
  • Power Outputs : 4 Speakon outputs
  • RS232 port : Allow firmware upgrade for software improvement and new cabinet setups.
  • GPIO port : 5 Global Purpose Inputs and 8 Global Purpose Outputs
  • Front Panel : On/Off switch, Wheel, A/B buttons, 40 char x 2 display. Amp protect/Stand-by/Power LED’s. For each ch: volume (15 LEDs), Mute w LED, Output current LED, Protect LED, Peak LED.
  • Rear Panel : 1 mains socket (2 for NXAMP4X4); RS232; GPIO, Expansion slot, 4 XLR w link, 4 Speakon 4

USER CONTROLS

  • System Selection : Allows control from all NEXO ranges.
  • System Set-up : Within the selected range when possible, allows the cabinet to be set for passive/active mode, wideband/crossover mode, choose among crossover point, cardiod/supercardiod mode.
  • Protection : Multiple Peak Limiters fitted for both selected cabinet and amplifier. Multiple Acceleration, Displacement and Temperature protections on every channel.
  • Delay : Up to 66m (145 ft.) of delay in 10cm (.4in ) steps
  • Input Patching : Any of the 4 analog (or 8) inputs combination to be routed on each output.
  • Output Gain : Global and inter-channel gain +/-6dB in 0.5dB steps.
  • Volume control : Each channel with 16 steps from – inf dB to 0 dB.
  • Save/Recall : Set-up Stores 32 user set-ups
  • Array EQ : LF/HF shelving filters to compensate ground/stacking effects, +/-6dB
  • Security Mode : Password protected for Read-Only or Remote-Only Mode.
  • Remote control : Full remote control via the Ethersound protocol and ESmonitor software.
  • Certification : UL, SEMKO (CE), CCC, KOREA, TSS, PSE
  • Green status : Compliant with ROHS and WEEE directive

Vue objet Quicktime VR® :

Cliquez-glissez votre souris sur l'objet pour le visualiser en 3D sous 360°

 
 

 

Catalogue
PDF / Papier

APP PC

APP MAC

MyBox by Novelty

Bureau d'étude
Calculateurs