MARTIN Mac Quantum Profile

Full description

This extremely bright LED profile fixture combines top-quality white light with a fast, smooth CMY color mixing system and crisp gobo projection on surfaces as well as mid-air. With all this and the new Animotion™ FX system that allows never-before seen beam animations, the market is now finally seeing the first real 700/800 W discharge lamp replacement in a profile fixture that effectively harnesses cutting-edge LED technology. First real alternative to a 700/800 watt HID fixture Flat field, crisp image, high contrast Full feature set including CMY color mixing and 1:3 zoom Pure white 6500 K LEDs combined with fast, responsive and even CMY color mixing Very low weight and compact design Consistent photometric performance via LED technology Dynamic Effects Color mixing: CMY, independently variable 0 - 100% Color wheel: 6 color filters plus open Rotating gobo wheel: 6 interchangeable gobos plus open, wheel rotation, gobo rotation, indexing and shake Static gobo wheel: 10 gobos plus open, wheel indexing, rotation and shake Beam effects: Rotating three-facet prism Zoom: 12° - 36° (1:3) Pan and tilt speed: Adjustable via onboard control panel and DMX Focus: Motorized, with zoom-focus tracking Iris: 0 - 100%, pulse effects Shutter effect: Electronic, with variable speed regular and random strobe Electronic dimming: Four dimming curve options Pan: 540° Tilt: 268° Control and Programming Control system: DMX RDM: Implemented Control resolution: 8-bit, with 16-bit control of dimming, gobo indexing, zoom, focus, pan and tilt DMX channels: 19/27 Setting and addressing: Control panel with backlit graphic display DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: RS-485 Fixture software update: Direct using USB memory stick or via DMX link using Martin USB Duo™ DMX Interface Box Optics Light source: 475 W LED engine Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under manufacturer´s test conditions Construction Color: Black Housing: High-impact flame-retardant thermoplastic Protection rating: IP20 Installation Mounting points: 4 pairs of quarter-turn locks Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 0.2 m Minimum distance to illuminated surfaces: 2.0 m Connections AC power input: Neutrik PowerCon DMX and RDM data in/out: 5-pin locking XLR Electrical AC power: 120-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Maximum total power consumption: 750 W Typical half-cycle RMS inrush current: 10.3 A Typical power consumption, all effects static, zero light output: Approx. 50 W Maximum total power consumption: 750 W Typical half-cycle RMS inrush current: 10.3 A Typical Power and Current 120 V, 60 Hz: 4.8 A, 576 W, PF 0.999 208 V, 60 Hz: 2.8 A, 568 W, PF 0.991 230 V, 50 Hz: 2.5 A, 565 W, PF 0.988 240 V, 50 Hz: 2.4 A, 565 W, PF 0.988 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. Thermal Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C Minimum ambient temperature (Ta min.): 5° C Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr. Approvals EU safety: EN 60598-2-17 (EN 60598-1), EN 62471 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety (pending): UL 1573 US EMC: FCC Part 15 Class A Canadian safety (pending): CSA C22.2 No. E598-2-17 (CSA E60598-1) Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241